📝 Guides

Black Friday 3D Printer Deals 2026: Price Floors to Expect

Black Friday 3D Printer Deals 2026: Price Floors to Expect Guides

The best-kept secret of Black Friday 2026 is sitting in a terms and conditions page. Bambu Lab has published its full printer price list through December 1, and the same page says 3D printers are excluded from its flash sales. If you were planning to wait for November 27 to buy an A1 or a P1S, the number you were waiting for is probably the number on the store today.

That is not true of every brand, and the differences are what make this list useful. Anycubic says its printer discounts will keep growing through the campaign. Creality had no dated sale we could confirm, and two of its prices were lower in late October than they are now. Prusa is giving away accessories rather than cutting prices. So the real question is not “how low will it go” but “which brands still have room to move.” We checked each maker’s US store on November 3, 2026, and built the table below from what those stores actually showed.

The Price Floor Table

Every price in the second column came from the maker’s own US store or published sale terms on November 3, 2026, before tax and before coupons. The third column is the store’s own typical or strike-through price, which is the brand’s claim, not ours. The fourth is the lowest 2026 price we could confirm, with its source. Where nothing checkable exists, we say so instead of guessing.

The last column is our prediction, not a published price. It is an estimate of the Black Friday target for that printer, and it could be wrong in either direction.

PrinterStore price, Nov 3Typical or listLowest verified in 2026Black Friday target (PREDICTION)
Bambu A1 mini$199$219$199 now; $209 in June (Bambu)Holds at $199
Bambu A1$259$299$259 now; $279 in June (BambuHub)Holds at $259
Bambu A1 Combo$359$399$359 nowHolds at $359
Bambu A2L$439$469$439 now; no earlier sale logged (BambuHub)Holds at $439
Bambu A2L Combo$519$569$519 nowHolds at $519
Bambu P1S$349$399$349 now; $359 on Sept 17 to 22 (BambuHub)Holds at $349
Bambu P1S AMS 2 Pro Combo$509$579$509 nowHolds at $509
Bambu P2S$449$549$449 now; $499 in June (BambuHub)Holds at $449
Bambu P2S Combo$649$749$649 nowHolds at $649
Bambu X2D$589$649$589 now; no earlier sale logged (BambuHub)Holds at $589
Bambu X2D Combo$789$899$789 nowHolds at $789
Bambu H2D Combo$1,599$1,749$1,599 nowHolds at $1,599
Bambu H2C Combo$1,899$2,199$1,899 now; $2,099 on Sept 16 to 22 (BambuHub)Holds at $1,899
Elegoo Centauri 2 Combo$284$379Not verifiedHolds at $284
Elegoo Centauri Carbon 2$319$359Not verifiedHolds at $319
Elegoo Centauri Carbon 2 Combo$369$449$369 now; also $369 in June and on Sept 10 (TechRadar)Holds at $369
Elegoo Mars 5 Ultra$259$338Not verifiedHolds at $259
Elegoo Saturn 4 Ultra 16K$399$649.99$399 since Oct 21 (Planet3DP)Holds at $399
Anycubic Kobra 4 Combo$299$499Not verified$279 to $299
Anycubic Kobra X$279$399$279 now; also $279 in the March spring sale (All3DP)$259 to $279
Anycubic Kobra X Combo$469$599$469 since Oct 26 (Planet3DP)$429 to $469
Anycubic Photon P1$499$699$499 since Oct 26 (Planet3DP)$469 to $499
Creality Ender-3 V3 SE$199None shown$179 on Oct 26 (Makers101)$179
Creality K2 Combo$549$699$521 on Oct 26 (Makers101)$499 to $521
Prusa MK4S kit$709No cut shown$709 since Oct 17 (Planet3DP)Holds at $709, gifts only
Prusa CORE One+ (Gen 2) kit$999No cut shown$999 since Oct 17 (Planet3DP)Holds at $999, gifts only

A “now” in the lowest-price column means today’s price is the lowest we could confirm. For Bambu that rests on a third-party log, BambuHub, with daily coverage of base printers starting July 17, 2026 and combos starting October 4, so a lower price earlier in the year is possible but unconfirmed. Strike-through prices deserve some skepticism too, especially at Anycubic, where the gap between list and street price is wide.

Sale Dates by Brand

Most of these sales started well before Thanksgiving week. Black Friday itself falls on November 27, and Cyber Monday on November 30. The dates below come from each brand’s own sale page or terms.

BrandSale windowPrinter discount type
PrusaOct 22 to Nov 30, 11:59 p.m. PSTGifts, plus Prusament up to 40% off
AnycubicOct 26 to Nov 29, then Cyber Monday Week Nov 30 to Dec 7Direct cuts, advertised as growing over time
Bambu LabOct 27, 8:00 a.m. ET to Dec 1, 2:00 a.m. ETDirect cuts, fixed list in the terms
ElegooNov 2, 3:00 a.m. to Dec 1, 3:00 a.m. ESTDirect cuts, plus $1 material add-ons
CrealityNo dated 2026 sale confirmedStore-level price changes

The practical takeaway from this table is that “wait until Black Friday” stopped being a strategy some time ago. For four of the five brands, you are already inside the sale, and the remaining question is whether the price still moves before it ends.

Creality is the holdout. Its store carries a “Black Friday Early Deals” page that mentions a November 10 main event, but that matches the 2025 calendar and the page gives no year for it, so we are not treating it as a 2026 date. If a dated announcement appears, it belongs in this table.

Bambu Lab: The Sale Price Is Probably the Floor

Bambu’s Black Friday terms list a fixed special offer for every printer and bundle, and they schedule seven 24-hour flash sessions, including November 27 and November 30. The line that matters is “3D printers and AMS are excluded from these flash sales.” Those sessions are for filament, accessories, and similar items. That is why our prediction column reads “holds” all the way down the Bambu rows: there is no announced event left that would lower a printer price, although Bambu can change a price any time it wants. BambuHub’s records of last year’s sale help frame this: the A1 mini’s $199 only ties 2025’s Black Friday price, while the A1 is $20 lower and the P1S $50 lower than they were then. The terms also note that offers may vary with public policy changes such as tariff adjustments, which is a risk that runs upward as easily as downward.

The real remaining discount is credits. Bambu’s check-in campaign pays 800 credits for November 2 to 8, 600 for November 9 to 15, and 600 for November 16 to 22, for 2,000 total. Those redeem for coupons: 500 credits for $15 off $500, 1,000 for $30 off $700, and 2,000 for $50 off $900. The terms do not exclude printers from those coupons, so if they apply in your cart, the math works out to about $634 for a P2S Combo, $759 for an X2D Combo, and $1,849 for an H2C Combo. Confirm it at checkout before counting on it. Sale-page text also mentions a PayPal coupon of $25 on orders over $800, with limited spots.

Do not lean too hard on Bambu’s 30-day price protection, either. Its policy excludes flash sales, limited-time promotions, and coupons from claims, so it is not a blanket Black Friday guarantee. And note the first thing that is not on the list: the H3C, the nine-tool flagship that went on sale November 3 at $2,499. It does not appear in the sale terms. If you are weighing it against the H2C, the $300 cut on the older machine is the story. For the A2L in particular, our A2L and anniversary sale post covers where that machine fits, and the $439 US price here supersedes the euro launch figures in that piece.

Elegoo: Watch the Add-Ons, Not the Sticker

Elegoo’s sale opened November 2 with the Centauri Carbon 2 Combo at $369, down from $449. That is an aggressive number, but it is not a new one: TechRadar reported the same $369 on September 10 and said it matched a June deal. Three separate appearances at one price is about as close as this market gets to a real floor, which is why we expect it to hold. The strike-through also flatters the deal. Tom’s Hardware covered a $399 flash price in September, Planet3DP has logged $399 since mid-October, and the store’s base product listing still carries that figure, so the practical cut from recent street price is closer to $30 than $80.

The move left for Elegoo buyers is timing around $1 Flash Deals. On November 6, 13, 20, 27, and 30, each session running 24 hours from 3:00 a.m. EST, select printers can add 1 kg of selected filament or resin for $1, and the products change by round. The terms say offers do not stack, that promo codes and points coupons cannot be combined with sale prices, and that the $1 deal only counts through that page during a session. If you want a Centauri-series printer, buying during one of those five windows beats buying the day before. At the $20 per kilo we used in our true cost of a 3D print breakdown, that add-on saves about $19.

Anycubic: The One Brand Telling You to Wait

Anycubic’s Black Friday guide says it plainly: “The longer the sale goes on, the better the printer deals get,” with discounts increasing through the campaign until all printers reach their lowest prices of the year. It also runs in phases, with Phase 1 ending November 20 and Phase 2 running November 21 to 29, adding free gift packages on selected printers and random order rebates. That makes it the only brand here with a written reason to hold off.

There are caveats. The same guide also offered an Early Bird code from October 20 to 25, promising the lowest price of the season with a refund of any difference, and that window has closed. That promise only covers those early orders. The Kobra X is already at $279 on the US store, matching its March spring sale price, so our $259 to $279 range is a modest bet. Our under-$300 guide from September did not include it, and at this price it belongs in that conversation. One practical note: Anycubic sells through a separate US store, and its global store showed higher prices on the same day ($299 for the Kobra X), so make sure you are shopping the right one.

Creality: Lower in October, With Room to Fall

Creality is the hardest brand to pin down, which also makes it the most interesting. Its store showed the Ender-3 V3 SE at $199 and the K2 Combo at $549 on November 3, yet Makers101 logged the same two machines at $179 and $521 on October 26. Prices that have already been lower this recently can return without any special event. That is the entire basis for our targets, and they lean on a single third-party source, so treat them as a floor to watch for, not a promise.

The K2 without the CFS is $399, but its product page showed it out of stock with an estimated ship date of November 6. Newer models are also in the mix: the K3 is on pre-order at $849 with shipping estimated for early December, so it is a gamble as a Christmas gift. Our rule for Creality this month is simple. Set a price alert rather than a calendar reminder, and do not pay $199 for the V3 SE if you can wait a couple of weeks.

Prusa: Gifts Instead of Cuts

Prusa’s sale runs through November 30, and the structure is different from everyone else’s. Its announcement lists gifts, not printer discounts: up to $450 in extras on the CORE One+ (Gen 2), which starts at $999 as a kit, and up to $200 on the MK4S, which starts at $709. The bundle includes things like a Prusament spool, an extended warranty year, and a $50 INDX upgrade voucher redeemable after January 1, 2027. Offers run until supplies last, so “up to” is doing some work in those figures.

The honest value test is whether you would have bought those extras anyway. An extended warranty year is worth real money to someone planning to run a machine for years, and worth little to someone who is not. Prusament itself is up to 40% off during the sale, which is the cleaner deal if you already own a printer. Prusa buyers are rarely shopping on price alone, and a sale built on accessories assumes as much.

What We Would Do With This List

If the machine you want is a Bambu or an Elegoo, stop waiting and just pick your moment within the sale. For Bambu, that means collecting check-in credits while the rounds are open, then buying before the sale ends on December 1. For Elegoo, it means buying inside a $1 Flash Deal window. If it is an Anycubic, check again after Phase 2 opens on November 21, since that is when the brand’s own promise of deeper cuts should show up. If it is a Creality, set an alert at the target price and be patient.

The bigger signal is what the floors say about 2027. The P1S once listed at $699, and it now has a $399 typical price and a $349 sale price, which resets almost every comparison in our best 3D printers of 2026 guide. Bambu is now selling a $2,499 tool changer at the top of its range while the entry models keep getting cheaper, and that squeeze makes the $300 to $500 tier the place to watch after the holidays. We will update this table if a brand publishes new prices or Creality dates its sale, and after November 27 we will mark which of these predictions held.

Sponsored

Ready to Print?

Browse our guides for more tips on getting the best results from your printer.

Browse All Guides

Ready to Print?

Browse our guides for more tips, reviews, and step-by-step tutorials to get the most out of your 3D printer.

Browse All Guides

Ready to Print?

Browse our guides for more tips, filament reviews, and printer comparisons.

Browse All Guides